Tipsoi Fastface 5 pro FP Model D560

A multi-authentication attendance and access control terminal from Inovace Technologies LTD, combining live face recognition, fingerprint, palm, QR code and smart card verification in one industrial-grade unit.

Tipsoi Fastface 5 Pro FP

Matching Speed of
1 Second or Less

30,000 Face
Template Capacity

Voice Output

No Dedicated PC Required

Cloud Web Panel for Device Management

5-inch IPS All-Sight LCD Touchscreen

Direct Cloud Connection

Web and Mobile App
(Android & iOS)

One Terminal, Five Ways to Verify

The Fastface 5 Pro FP (D-560) is built for organisations that cannot standardise on a single verification method. Office staff can check in by face without touching the device. Workers whose hands or faces are covered by protective equipment can fall back to a card or a palm scan. Contractors and short-term visitors can be cleared through a QR code without being enrolled biometrically at all. Every one of those paths writes to the same attendance management system, so the reporting stays consistent no matter which method an individual used.

Verification is handled on the device itself by an embedded ARM Cortex-A7 multi-core processor with dedicated AI acceleration, matching a face in one second or less at 99% recognition accuracy. Because the matching runs locally rather than in the cloud, throughput at the door does not depend on network conditions, while the results still sync to the central platform in real time.

Features

Industrial-grade design with stable performance and smooth lines
Live face detection, configurable from 0.3 m to 2 m on the device
Face, fingerprint, palm, QR code and smart card verification
Configurable multi-factor authentication policies
Recognition speed of one second or less
99% recognition accuracy
FAR of 0.001% and FRR of 0.1% for face recognition
1:1 and 1:N face recognition modes
5-inch IPS all-sight LCD touchscreen
Dual camera, infrared and RGB, at 1932 x 1092 resolution
120 dB WDR for anti-backlight performance
Face capacity 30,000 and card capacity 30,000

Fingerprint capacity 10,000 and log capacity 200,000
IP65 rated against water and dust
Wi-Fi (IEEE 802.11 b/g/n) and LAN connectivity
REST and JSON API for IoT integration
TLS encryption, role-based access and audit logs
Wiegand, relay, RS232 and USB Host interfaces
Relay output for door control
Voice output and real-time clock
Firmware updates over USB or OTA
Cloud-based Tipsoi HRM software
Tipsoi mobile app for Android and iOS
Enrol once, then use the same profile across devices
Three-year warranty

Where the Fastface 5 Pro FP Differs

Features

Fastface 5 Lite

Others

Find Out If the D-560 Fits Your Site

Manual registers and disconnected terminals create work that nobody wants to do twice. Tell us how many entry points you run and how your teams are shifted, and we will tell you whether this model is the right fit or whether another unit in the Tipsoi device range suits you better.

What Sets the Fastface 5 Pro FP Apart

Peak-hour throughput is decided by consistency rather than by a single best-case number. The D-560 matches a face in one second or less at 99% accuracy, with a false acceptance rate of 0.001% and a false rejection rate of 0.1%. Those last two figures matter more than they look on a datasheet: a low false acceptance rate is what keeps an unauthorised person out, while a low false rejection rate is what stops a legitimate worker from being turned away and queueing twice.

The dual camera setup pairs an infrared sensor with an RGB sensor at 1932 x 1092 resolution, and 120 dB wide dynamic range handles the difficult lighting that defeats single-sensor devices. That covers an entrance facing direct glare during part of the day, a corridor that goes dim on a night shift, and a gate where workers arrive backlit against bright sky. Live face detection works from 0.3 m to 2 m and the range is configurable on the device, so the trigger distance can be tuned to a narrow doorway or an open lobby.

Because matching happens on the terminal itself rather than being sent away for processing, recognition does not stall when the connection is slow. Records still reach the central platform in real time once the link is available.

At 174 mm by 84 mm by 18 mm without its support bracket, the terminal sits close to the wall instead of protruding into a doorway. The slim profile suits a reception area or a corporate lobby where a bulky security fixture would look out of place.

The same unit is rated IP65 against water and dust, and rated for operation from minus 10 degrees to plus 60 degrees Celsius at 10% to 90% humidity. That combination is what allows a single model to be specified across an entire property rather than buying one device for the air-conditioned head office and a different one for the gate house, the yard or a covered site entrance. Anyone deploying across construction and site-based workforces will recognise why that consistency simplifies both procurement and spares.

Design and durability specifics:

18 mm depth, 174 mm by 84 mm face, excluding the support
IP65 protection against water and dust ingress
Operating range of minus 10 to plus 60 degrees Celsius
Working humidity from 10% to 90%
CE, FCE and ROHS certification
Three-year warranty
Supplied with power adapter, mounting kit, back plate and cables

Five verification methods are supported on the device: face, fingerprint, palm, QR code, and ISO/IEC 14443 Type A/B 13.56 MHz smart cards. More useful than the count is that they can be combined. Authentication policies are configurable, including face only, card only, fingerprint only, face plus card, face plus fingerprint, card plus fingerprint, face plus card plus fingerprint, and other combinations.

That flexibility is what lets one device serve areas with different risk levels. A general staff entrance can run on face alone for speed. A server room, cash office or controlled store can require two factors before the relay releases the lock. Nothing needs to be re-specified in hardware terms; the policy changes and the same terminal enforces it.

Capacity is sized for growth rather than for today’s headcount. The device holds 30,000 face templates, 30,000 cards, 10,000 fingerprints and 200,000 logs, which covers large multi-shift populations and seasonal intake without a hardware change. Live face detection guards against presentation attempts using a photograph or a screen, and 1:1 and 1:N modes are both available depending on whether an identity is being confirmed or searched.

Connectivity is built in over Wi-Fi (IEEE 802.11 b/g/n) and LAN, with a 10/100/1000 Ethernet port on the unit. The protocol list is where integration work actually gets easier: TCP/IP, MQTT, DHCP, HTTPS, NTP and a REST and JSON API for IoT communication. An MQTT broker keeps data flowing without polling, and NTP keeps timestamps aligned across sites, which is what makes cross-site reports trustworthy in the first place.

The API is deliberately lightweight and designed for real integration rather than a one-way export. It uses a JSON data format with a push and pull dual transfer mechanism, supports chunk-wise transfer so the receiving system can process data at its own pace, and lets a customer platform database ID be used as the Inovace platform user ID so records map cleanly between the two systems. A single central API serves any number of devices, with devices or projects separated by API tokens.

Alongside the API, a cloud-based web panel handles device management from any location, with central database management, real-time data, one-time enrolment, bulk user creation from an Excel file, device data cloning to another terminal, and fingerprint template management from the panel itself. End-to-end encryption protects data in transit. On the device, security is handled through TLS encryption, a password-protected administrator account, role-based access and audit logs.

Wiring options cover the physical side of an installation: Wiegand, relay, RS232 and USB Host, with a relay output for door hardware and a real-time clock on board. Firmware is updated over USB or OTA.

The Tipsoi mobile app for Android and iOS gives managers attendance data, access logs and system controls without requiring them to be on site. For anyone supervising several locations, that removes the round of calls and site visits that manual attendance collection normally involves, and it means an unusual pattern can be picked up on the day it happens rather than at month end.

Employee-side self-service reduces the routine load on HR. The associated centralised software optionally supports an AI-powered chatbot or voice assistant for employee self-service functions, which takes the repetitive questions about balances, timings and records away from the HR inbox.

Device setup is deliberately simple. A terminal is activated by scanning a QR code from the Tipsoi HRM mobile app, so bringing a new unit online at a new site does not require a specialist visit or a dedicated PC. Details are covered in the Tipsoi HR and attendance platform overview.

Activate in Minutes With a QR Scan

Scan the QR code from the Tipsoi HRM mobile app and the device comes online. No dedicated PC and no manual configuration required.

Tipsoi Software Packages

Tipsoi Pricing

Tipsoi Essential

Centralized Attendance Management
Access Control
Shift Management
Android & iOS App
Live Dashboard with Attendance Feed
Detailed Attendance Reports
Bulk Data Upload
Holiday & Event Calendar
App & Email Notifications
App Based Attendance
Employee Self-Login

Get a Quote

Tipsoi Standard

All Essential Package Features
Monthly & Individual Attendance Reports
Basic HRIS Database
Leave Management with Approval Matrix
Multiple Shift Management with Rostering
Temporary Allocation
Overtime Management
App Attendance with Geo-Fencing
Advanced Dashboard View
Dedicated Customer Experience Manager

Get a Quote

Tipsoi Premium

All Essential Package Features
All Standard Package Features
Multiple Admin User – Manage the system with several admins.
Advance Rostering with Auto Rotation – Automate complex shift rotations.
HRIS Document Storage – Securely store and access employee records.
Additional Reports and Insights – Get deeper analytics and workforce trends.
Advanced Access Control (Area) – Control access by specific zones/areas. Strengthen security with precise permission settings.

Get a Quote

Tipsoi Fastface 5 pro FP Model D560

99% Recognition Accuracy

Wi-Fi and LAN Connectivity

Voice Output

Tipsoi Mobile App

Face Capacity 30,000

Live Face Detection

Fingerprint Capacity 10,000

13.56 MHz Smart Card Support